Pipe testing units - Pipe mill equipment
Pipe testing presses for spirally and straight welded pipes
Pipes with small and medium diameters are sealed on the face with these testing presses. In case of large diameters, the seals are inserted. The maximum number of simultaneous tests depends on many aspects.
The technical data below represents limit values. Only one segment is possible and reasonable for one machine.
|
Range of pipe diameters |
2 3/8“ - 80“ |
|
|
|
60.3 - 2032 |
mm |
|
Pipe lengths |
3000 - 16000 |
mm |
|
Wall thickness |
2.1 - 31.8 |
mm |
|
Max. locking pressure |
40,000 |
kN |
|
Max. test pressure |
30.0 / 4260 |
MPa / psi |
|
Dwell time |
Freely programmable |
|
|
Max. number of testing axes |
2 |
|
Pipe testing presses for seamless drawn pipes
Drawn pipes are sealed at the outer diameter. Self-clamping or hydraulically clamped testing heads are used depending on the range of diameters and pressures.
The maximum possible number of simultaneous tests depends on many criteria. The technical data below represents limit values. Only one segment is possible and reasonable for one machine.
|
Range of pipe diameters |
3/8“ - 16“ |
|
|
|
10 - 406 |
mm |
|
Pipe lengths |
3000 - 16000 |
mm |
|
Wall thickness |
1.7 mm - 31.8 |
mm |
|
Max. locking pressure |
20,000 |
kN |
|
Max. test pressure |
85.0 / 12000 |
MPa / psi |
|
Dwell time |
Freely programmable |
|
|
Max. number of testing axes |
4 |
|
Pipe handling systems, rinsing devices and end bevelling machines
These machines can be offered for pipe testing presses manufactured by us. Please contact us